Tehran University of Medical SciencesNanomedicine Research Journal2476-34891220161001New Approaches to Use Nanoparticles for Treatment of Colorectal Cancer; a Brief Review59682186610.7508/nmrj.2016.02.001ENLeila HamzehzadehDepartment of Medical Genetic, Faculty of Medicine, Mashhad University, Mashhad, IranArmin ImanparastDepartment of Medical physics, Faculty of Medicine, Mashhad University of Medical Sciences, Mashhad, IranAmir TajbakhshDepartment of Modern Sciences and Technologies, Faculty of Medicine, Mashhad University of Medical Sciences, Mashhad, IranMahdi RezaeeDepartment of Medical Biotechnology, School of Medicine, Mashhad University of Medical Sciences, Mashhad, IranAlireza PasdarDepartment of Medical Genetic, Faculty of Medicine, Mashhad University, Mashhad, IranDepartment of Modern Sciences and Technologies, Faculty of Medicine, Mashhad University of Medical Sciences, Mashhad, IranDivision of Applied Medicine, Medical School, University of Aberdeen, Foresterhill, Aberdeen, UK.Journal Article20160908Nanoparticles have been at the center of research focus as a new promising material for the treatment of cancer in recent years. Although many chemotherapy drugs for cancer treatment are available, their potential toxicity is the main point of concern. On the other hand, the conventional chemotherapeutic approach has not been found to be very efficient in colorectal cancer (CRC) as the drug molecule does not reach the target site with an effective concentration. A major challenge in cancer therapy is to destroy tumor cells without harming the normal tissue. To overcome this problem scientists are trying to use nanoparticles to directly target cancer cells for a more effective treatment and reduced toxicity. Different nanoparticles such as: liposomes, polymeric nanoparticles, dendrimers, and silica have been developed to carry a variety of anticancer agents including: cytotoxic drugs, chemo modulators, siRNA and antiangiogenic agents. This review discusses various treatments for colon cancer and the potential use of nanoparticles which facilitate targeting of cancer cells. The outlook for new treatment strategies in CRC management is also underlined.Tehran University of Medical SciencesNanomedicine Research Journal2476-34891220161001A First-Principles Study of the Interaction of Aspirin with Nitrogen-Doped TiO2 Anatase Nanoparticles69782062010.7508/nmrj.2016.02.002ENAmirali AbbasiMolecular Simulation laboratory (MSL), Azarbaijan Shahid Madani University, Tabriz, IranComputational Nanomaterials Research Group (CNRG), Azarbaijan Shahid Madani University Tabriz, IranDepartment of Chemistry, Faculty of Basic Sciences, Azarbaijan Shahid Madani University Tabriz, IranJaber Jahanbin SardroodiMolecular Simulation laboratory (MSL), Azarbaijan Shahid Madani University, Tabriz, IranComputational Nanomaterials Research Group (CNRG), Azarbaijan Shahid Madani University Tabriz, IranDepartment of Chemistry, Faculty of Basic Sciences, Azarbaijan Shahid Madani University Tabriz, IranJournal Article20160314<strong>Objective(s):</strong> First-principles calculations have been carried out to investigate the interaction of aspirin molecule with nitrogen-doped TiO<sub>2</sub> anatase nanoparticles using the density functional theory method in order to fully exploit the biosensing capabilities of TiO<sub>2</sub> particles. <strong><br />Methods:</strong> For this purpose, we have mainly studied the adsorption of the aspirin molecule on the fivefold coordinated titanium atom site of the TiO<sub>2</sub> nanoparticles because of the more reactivity of this site in comparison with the other sits. The complex systems consisting of the aspirin molecule positioned toward the undoped and nitrogen-doped nanoparticles have been relaxed geometrically. <br /><strong>Results:</strong> The obtained results include structural parameters such as bond lengths and energetic of the systems. The electronic structure and its variations resulting from the adsorption process, including the density of states, molecular orbitals and the Mulliken charge transfer analysis have been discussed. We found that the adsorption of aspirin molecule on the nitrogen-doped TiO<sub>2</sub> nanoparticles is energetically more favorable than the adsorption on the undoped ones. <br /><span id="transmark" style="display: none; width: 0px; height: 0px;"></span><br /><strong>Conclusions:</strong> These results thus provide a theoretical basis and overall understanding on the interaction of TiO<sub>2</sub> nanoparticles with aspirin molecule for applications in modeling of efficient nanomedicine carriers, biosensors and drug delivery purposes.Tehran University of Medical SciencesNanomedicine Research Journal2476-34891220161001Preparation and Characterization of Nanostructure Akermanite Powder by Mechanical Activation Method79832091110.7508/nmrj.2016.02.003ENKazem MarzbanDepartment of biomaterials, Science and Research Branch, Islamic Azad University, Yazd, IranJournal Article20160306<br /><strong>Objective(s):</strong> So far, extensive research has been conducted on the preparation and characterization of nano ceramics based on Ca-Si by sol- gel method and bioactivity was evaluated, but, a few researches have paid attention to the preparation of materials by mechanical activation (MA). The aim of this study was the preparation of akermanite nano powder by mechanical activation method and bioactivity evaluation. <br /><strong>Methods:</strong> Akermanite was prepared by MA method and subsequent heat treatment. Samples were mixed of calcium oxide (CaO), silicon dioxide (SiO<sub>2</sub>) and magnesium oxide (MgO) with molar ratio of 2:2:1, respectively. These were milled for 6 h, 8 h, and 10 h with ball-to- powder ratio 10:1 and rotation speed of 300 rpm. After synthesis, the samples were pressed under 25 MPa and heated at 1100 ºC for 3 h. X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy-dispersive x-ray spectrum (EDX-mapping) analysis were performed to characterize three kinds of powder. Bioactivity evaluation of the akermanite ceramics was investigated by being immersed in the simulated body fluid (SBF). <br /><strong>Results:</strong> According to XRD pattern, the sample which was milled for 10 h at heat treatment at 1100 ºC only indicated the pure akermanite phase. The crystalline size of nano powder indicated that with ball milling time increase, the sizes of crystalline were decreased. Also, SEM images showed that, apatite nucleation happened and it grew on the sample surface. <br /><span id="transmark" style="display: none; width: 0px; height: 0px;"></span><br /><strong>Conclusions:</strong> In the present investigation, the nanostructure akermanite powder can be prepared by mechanical activation (MA).Tehran University of Medical SciencesNanomedicine Research Journal2476-34891220161001The Impact of Nano-Sized Gold Particles on the Target Dose Enhancement Based on Photon Beams Using by Monte Carlo Method84892113910.7508/nmrj.2016.02.004ENHossein KhosraviHealth Institute, Chmran Hospital, Tehran, Iran.0000-0001-6137-4143Armita MahdaviDeparment of Basic and Clinical Research, Tehran Heart Center, Tehran University of Medical SciencesFaezeh RahmaniDepartment of Physics, K. N. Toosi University of Technology, Tehran, Iran.Ahmad EbadiHealth Institute, Chamran Hospital, Tehran, IranJournal Article20160208<br /><strong>Objective(s): </strong>In this study we evaluate the impact of the different aspects of Gold Nano-Particles (GNPs) on the target absorptive Dose Enhancement Factor (DEF) during external targeted radiotherapy with photon beams ranging from kilovolt to megavolt energies using Monte Carlo simulation. <br /><strong>Methods:</strong> We have simulated the interaction of photon beams with various energies of radiation using water solution containing GNPs to be located in a tumor region and used MCNP5 code for Initially, the water phantom in which a tumor dimensions of 1 × 1 × 1 cm<sup>3 </sup>was defined as the target, contained simulated GNPs. Then, themacroscopic DEF of GNPs of different sizes, including 15, 50, and 100 nm, had been calculated at the target area with a fixed concentration of 7 mg/g during external beam radiotherapy with single-energy photon beams ranging from keV to MeV. <br /><strong>Result</strong><strong>s:</strong> The tumor DEFs in the presence of GNPs were obtained 1.69-2.66and 1.08-1.10 for keV and MeV beams, respectively. The highest DEF was achieved by photon energy of 50 keV. By increasing the size of the GNPs, the tumor dose factor raised too. <br /><strong>Conclusions:</strong> The factors calculated for enhancing the target dose of GNPs were in good agreements with previous studies based on keV photon energies. For MeV photon energies, after a reduction in the boundary between the two areas of water and the solution containing GNPs, the dose factor was enhanced to its maximum value for 2 and 6 MeV photon beams at the depths of 2.6 and 5.6 cm, respectively.Tehran University of Medical SciencesNanomedicine Research Journal2476-34891220161001Mathematical Kinetic Modeling on Isoniazid Release from Dex-HEMA-PNIPAAm Nanogels90962115910.7508/nmrj.2016.02.005ENMaryam JafariChemical engineering department, Engineering faculty, University of Tehran, Tehran, IranBabak KaffashiChemical engineering department, Engineering faculty, University of Tehran, Tehran, IranJournal Article20160531<br /><strong>Objective(s)</strong><strong>:</strong> The quantitative calculation of release data is more facil when mathematics come to help. mathematically modeling could aid optimizing and amending the delivery systems design. Aim of this study is to find out the isoniazid release kinetic. <br /><strong>Methods:</strong> In this work degradable temperature sensitive dextran-hydroxy ethyl methacrylate- poly-N-isopropyl acryl amide (Dex-HEMA-PNIPAAm) nanogels which were synthesized by UV polymerization were loaded by Isoniazid. The Isoniazid release amounts taken from in vitro studies at two different temperatures, below and upper lower criticalsolution temperature (LCST) were mathematically modeled to investigate the kinetic of drug release. Mathematically inquiry of release phenomenon of Isoniazid makes it easy to predict and recognize the influence of delivery device laying out parameters on release kinetic formulation. The modeling was performed using model dependent methods, such as zero order, first order, Higuchi, Korsmeyer- Pepas, Hixon and Crowel. <br /><strong>Results: </strong>The best fitted model showing the highest determination coefficient (R2) was Korsmeyer-Pepas which means predominant release mechanism is controlled by diffusion. <br /><strong>Conclusions:</strong> The Isoniazid release pattern of most samples was combination of swelling, diffusion and degradation.Tehran University of Medical SciencesNanomedicine Research Journal2476-34891220161001Design and Characterization of Mesalamine Loaded Nanoparticles for Controlled Delivery System971062181310.7508/nmrj.2016.02.006ENSimin SeifiradChemistry Department, Faculty of Science, Payame Noor University, Abhar, IranHasan KaramiChemistry Department, Faculty of Science, Payame Noor University, Abhar, IranShadab ShahsavariChemical Engineering Department, Varamin-Pishva Branch, Islamic Azad University, Tehran, IranFarzad MirabasiChemistry Department, North Tehran Branch, Islamic Azad University, Tehran, IranFarid DorkooshDepartment of Pharmaceutics, Faculty of Pharmacy, Tehran University of Medical Sciences, Tehran, IranMedical Biomaterials Research Center (MBRC), Tehran University of Medical Sciences, Tehran, IranJournal Article20160701<br /><strong>Objective(s):</strong> Nanoparticles (NPs) are known for their specific accumulation in the inflamed tissues of the colon and thus allow a selective delivery to the site of inflammation with minimum adverse effects. The main objective of this work is to attain mesalamine loaded chitosan nanoparticles as a carrier for oral delivery. <br /><strong>Methods:</strong> In this study, mesalamine loaded chitosan nanoparticles were prepared using an ionic gelation method. Experimental design Box-Behnken response surface methodology was used for the optimization of the nanoparticles. The nanoparticles size and gelation process of the polymeric nano-drug controlled release system depends on several variables including the concentration ratio of chitosan-TPP, concentration of mesalamine, concentration of chitosan solution and pH of the solution with optimum conditions of 2.3, 0.02 mg/ml, 0.1 mg/ml and 4.5, respectively. <br /><strong>Results:</strong> The mean particle size of the synthesized nanoparticles was ranging from 53.9 to 322.8 nm using a dynamic light scattering (DLS) technique. Moreover, the morphology of the prepared nanoparticles was observed by scanning electron microscopy (SEM). Also, characterization of the chitosan-mesalamine nanoparticles was performed by FT-IR spectrophotometer for specifying the chemical structure of nanoparticles molecules and differential scanning calorimetry (DSC) for studying thermal behavior. Drug release profile and the amount of the loaded drug were also monitored by UV-Vis spectroscopy. <br /><span id="transmark" style="display: none; width: 0px; height: 0px;"></span><br /><strong>Conclusions:</strong> Drug released showed that the release profile of mesalamine loaded nanoparticles was in a slow manner and no initial rapid release (burst effect) was illustrated.Tehran University of Medical SciencesNanomedicine Research Journal2476-34891220161001Application of Electrospun Nanofibrous PHBV Scaffold in Neural Graft and Regeneration: A Mini-Review1071112187910.7508/nmrj.2016.02.007ENAli GheibiTextile Engineering Department, Textile Excellence & Research Centers, Amirkabir University of Technology, Tehran, IranKamyar KhoshnevisanBiosensor Research Center, Endocrinology and Metabolism Molecular-Cellular Sciences Institute, Tehran University of Medical Sciences, Tehran, IranEndocrinology and Metabolism Research Center, Endocrinology and Metabolism Research Institute, Tehran University of Medical Sciences, Tehran, IranNajmeh KetabchiDepartment of Medical Nanotechnology, School of Advanced Technologies in Medicine, Tehran University of Medical SciencesMohammad Ali DerakhshanDepartment of Medical Nanotechnology, School of Advanced Technologies in Medicine, Tehran University of Medical SciencesArman AmaniBabadiNanotechnology and Catalysis Research Centre (NANOCAT), University of Malaya, IPS Building, 50603, Kuala Lumpur, MalaysiaJournal Article20160917Among the synthetic polymers, poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) microbial polyester is one of the biocompatible and biodegradable copolymers in the nanomedicine scope. PHBV has key points and suitable properties to support cellular adhesion, proliferation and differentiation of nanofibers. Nanofibers are noticeably employed in order to enhance the performance of biomaterials, and could be effectively considered in this scope. Electrospinning is one of the well-known and practical methods that extremely employed in the construction of nanofibrous scaffolds for biomedical application and recently PHBV has exploited in nerve graft and regenerative medicine. PHBV composites nanofibrous scaffolds are able to be applied as promising materials in many fields, such as; wound healing and dressing<strong>, </strong>tissue engineering, targeted drug delivery systems, functional carries, biosensors or nano-biosensors and so on. In this mini-review, we attempt to provide a more detailed overview of the recent advances of PHBV electrospun nanofibers application in neural graft and regeneration.Tehran University of Medical SciencesNanomedicine Research Journal2476-34891220161001Drug release rate and kinetic investigation of composite polymeric nanofibers1121212203410.7508/nmrj.2016.02.008ENMinoo SadriDepartment of Biochemistry and Biophysics, Education and Research Center of Science and Biotechnology, Malek Ashtar University of Technology, Tehran, IranAref MohammadiDepartment of Sciences, Rabe Rashidi University, Tabriz, IranHassan HosseiniNano Research Center, Faculty of Science, Imam Hossein Comprehensive University, Tehran, IranJournal Article20160810<br /><strong>Objective(s):</strong> In this work, electrospun nanofibers were explored as drug delivery vehicles using tetracycline as a model drug. Nanocomposite fibers including chitosan (CS)/poly (ethylene oxide) (PEO) and antibiotic were successfully prepared using electrospinning. CS blended with PEO considering a weight ratio of (90/10), and then, nanofibrous samples were successfully electrospun from their aqueous solutions. Afterwards, tetracycline was added to these samples for producing wound dressing materials. <br /><strong>Methods:</strong> Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were used for the evaluation of morphology and biodegradability studies of CS/PEO blend nanofibrous. The kinetic and drug release mechanism of drug-loaded electrospun samples were also investigated by ultraviolet-visible spectrophotometry (UV-Vis) and the appropriate model was proposed for prediction of drug release. <br /><strong>Results:</strong> The results have indicated that the addition of tetracycline as much as 0.4%wt brings about the best nanofiber. The results of stability study of composite nanofibrous showed that the samples containing the active ingredient of tetracycline have maintained their structure after 24 h in the vicinity of acetate buffer solution. The model of antibiotic release from the nanofiber was examined and it was found that the release mechanism can be described as Fickian diffusion model. According to this model, the kinetic degree of the drug release is around 0.41. <br /><strong>Conclusions:</strong> The study of drug release from this nanofiber showed that the liberation level is relatively high during the early hours and over time, high amounts of the drug diffuse from the inside of nanofiber into the aqueous environment.